This SmallRig Super Clamp review looks at a simple mounting tool for adding a camera accessory where a tripod or cage mount is not convenient.
Its adjustable jaw, rubber pads, and 1/4-inch and 3/8-inch threaded holes make it most appealing for compact setups built around compatible surfaces and lightweight gear.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for creators who need to attach compatible camera accessories to rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw opens from 15 mm to about 40 mm, for surfaces within that thickness range.
- 1/4-inch and 3/8-inch threaded holes provide attachment points for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
Pros
- The 15–40 mm jaw range can fit a variety of relatively narrow surfaces.
- Both 1/4-inch and 3/8-inch threads offer useful connection options.
Consider before buying
- The jaw range rules out surfaces thinner than 15 mm or thicker than 40 mm.
- Only the clamp is included, so a compatible mounting accessory may be needed for the intended camera or light.
Read the full review summary
The SmallRig Super Clamp is a compact clamp with a jaw range of 15 to 40 mm and threaded connection points for compatible accessories.
Its aluminum alloy and stainless steel construction, plus rubber pads on the clamping surfaces, suit creators who want a small mounting point that can attach to a shelf, crossbar, hook, or similar surface.
It is a straightforward choice when the mounting surface falls within the stated jaw range and the attached accessory uses one of its threaded holes.
The listed maximum weight recommendation is 3.3 pounds, so buyers should consider the complete accessory setup and how it will be used before mounting anything valuable or exposed to movement.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp can attach to surfaces from 15 to 40 mm thick and offers both 1/4-inch and 3/8-inch threaded holes.
Accessory compatibility
Two common thread sizes support a range of compatible camera and rig accessories.
Grip protection
Rubber pads are intended to help limit slipping and scratching where the clamp contacts a surface.
Portability
At 0.13 kg, it is a compact addition to a camera kit.
Load guidance
The 3.3-pound maximum recommendation gives a useful ceiling, though buyers still need to account for the setup and mounting conditions.
Out-of-box flexibility
The package includes one clamp, so a separate compatible accessory may be needed to position a camera or light.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens from 15 mm to about 40 mm, for surfaces within that thickness range.
- 1/4-inch and 3/8-inch threaded holes provide attachment points for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
- Compact, lightweight form weighs 0.13 kg.
- Package includes one super clamp; the listed maximum weight recommendation is 3.3 pounds.
Pros and Cons of SmallRig Super Clamp
Pros
- The 15–40 mm jaw range can fit a variety of relatively narrow surfaces.
- Both 1/4-inch and 3/8-inch threads offer useful connection options.
- Rubber contact pads help protect the surface and improve grip.
- Its compact 0.13 kg build is easy to pack with camera gear.
Consider before buying
- The jaw range rules out surfaces thinner than 15 mm or thicker than 40 mm.
- Only the clamp is included, so a compatible mounting accessory may be needed for the intended camera or light.
- The stated 3.3-pound maximum weight recommendation calls for care when choosing heavier or extended setups.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider this clamp if you need a compact way to attach a compatible accessory to a shelf edge, crossbar, hook, or another surface that measures between 15 and 40 mm thick.
The two threaded sizes add flexibility when your rig already uses compatible 1/4-inch or 3/8-inch connections.
Before buying, measure the intended mounting point and check the accessory’s thread size and full setup weight.
If the device will extend outward or the mount may move during use, evaluate the entire arrangement and keep valuable equipment positioned conservatively.
Who should skip it
Skip this design if your mounting surface falls outside the 15–40 mm jaw range, or if you need a complete arm or camera support in the package.
The clamp is a mounting base; buyers should confirm whether they already have the accessory needed to position their gear.
SmallRig Super Clamp review: fit, threads, and setup
Check the surface before planning the rig
The clamp’s stated opening range is 15 to about 40 mm. That makes measuring the attachment point a practical first step: an edge or bar outside that range will not fit as intended.
Consider the shape and accessibility of the surface too, since a clamp needs room to sit securely.
Thread options shape what you can attach
The 1/4-inch and 3/8-inch threaded holes allow connection to compatible accessories, such as a suitable arm or ball head.
The clamp itself does not supply those accessories, so check how your camera, light, or other gear will connect before treating it as a complete mount.
Keep the weight recommendation in context
The listed maximum weight recommendation is 3.3 pounds.
Use that figure as a planning limit for the attached setup, and think about how far the gear projects from the clamp and whether the mounting surface can accommodate the arrangement.
A compact clamp is best considered as one part of a rig rather than a substitute for evaluating the whole support.
Rubber pads add a useful contact detail
The rubber pads are intended to reduce slipping and scratching at the clamp’s contact points.
That can be helpful on finished surfaces, but buyers should still place the clamp carefully and confirm that it sits evenly before attaching equipment.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
Choose the main clamp if you already have a compatible accessory and want a simple mounting base.
Consider this alternative if its included double ball head and action camera adapter better match the way you plan to position your gear.
- This model combines a clamp with a double ball head and an action camera mount adapter, and is specified for a maximum 1.5 kg load.
- The SmallRig Super Clamp provides the adjustable 15–40 mm jaw and threaded holes, but the package includes only the clamp.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
The main clamp makes sense when you want a compact base and already own the connecting hardware. The kit may suit buyers who need a wider jaw range and an included arm for repositioning an accessory.
- This kit pairs a clamp that opens from 15 to 54 mm with a 9.8-inch articulating arm featuring 360-degree ball-head adjustment.
- The SmallRig Super Clamp has a 15–40 mm jaw and threaded holes, with no arm included.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering for a compact camera setup that needs a simple attachment point on a surface 15–40 mm thick.
Its dual thread sizes, rubber pads, and lightweight metal construction make it a practical base for compatible accessories.
Check the jaw fit, accessory connection, and complete setup weight before choosing it. Since the package contains only one clamp, buyers who need an arm or integrated positioning hardware should select a setup that includes those parts.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for creators who need to attach compatible camera accessories to rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw opens from 15 mm to about 40 mm, for surfaces within that thickness range.
- 1/4-inch and 3/8-inch threaded holes provide attachment points for compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.