The SmallRig Adjustable Articulating Magic Arm review centers on a straightforward rig accessory: a 9.8-inch arm with ball heads at both ends and 1/4-inch screws for positioning compatible gear.
It suits camera operators who need to place a monitor, light, or microphone at a chosen angle, provided the attached setup stays within the listed 213 g maximum weight recommendation.
SmallRig Magic Arm Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsSmallRig 2066B Adjustable Articulating Magic Arm
A flexible positioning arm for camera rig users mounting a compatible monitor, light, or microphone with a 1/4-inch connection.
- 9.8-inch articulating arm for positioning compatible camera accessories.
- Double ball-head design with 360-degree adjustment at both ends.
- 1/4-inch threaded screw at each end for connecting compatible gear.
- O-ring rubber cushion at the screw is designed to help prevent monitor scratches and improve grip.
Pros
- Dual ball heads offer flexible angle adjustment at both ends.
- The 9.8-inch reach can place an accessory farther from its mounting point than a short adapter.
Consider before buying
- The 213 g maximum weight recommendation limits it to lightweight accessories and setups.
- It is an arm rather than a clamp kit, so the rig must already provide a compatible mounting point.
Read the full review summary
The 2066B combines a long articulating arm with two 360-degree ball heads, giving you several ways to orient an accessory between its two 1/4-inch threaded connections.
An O-ring rubber cushion at the screw is designed to help protect a monitor from scratches and hold it more tightly.
The arm’s usefulness comes from flexibility and simple compatibility with common rig attachments, rather than from a clamp or mounting base of its own.
Consider it if your camera cage, rail, handle, or other rig point already provides a suitable 1/4-inch connection and you want more freedom to position a small accessory.
The listed maximum weight recommendation is modest, so check the combined weight and leverage of your accessory before buying; a larger monitor or heavier light may call for another support approach.
The buying factors
SmallRig Magic Arm Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
Two 360-degree ball heads make flexible orientation the arm’s central strength.
Connection versatility
Both ends use 1/4-inch threads, a familiar fit for compatible camera accessories and rig points.
Reach
At 9.8 inches, the arm offers more positioning distance than a compact stub mount.
Accessory protection
The O-ring cushion is intended to help prevent scratches and improve the screw connection’s hold.
Load suitability
The 213 g maximum weight recommendation keeps this best suited to lightweight accessories.
Mounting readiness
It provides an arm and threaded ends, so the rig needs to supply the supporting connection points.
Key Features and Specifications of SmallRig Magic Arm
- 9.8-inch articulating arm for positioning compatible camera accessories.
- Double ball-head design with 360-degree adjustment at both ends.
- 1/4-inch threaded screw at each end for connecting compatible gear.
- O-ring rubber cushion at the screw is designed to help prevent monitor scratches and improve grip.
- Listed for camera and monitor use, with a maximum weight recommendation of 213 g.
- The described package contains one articulating arm.
Pros and Cons of SmallRig Magic Arm
Pros
- Dual ball heads offer flexible angle adjustment at both ends.
- The 9.8-inch reach can place an accessory farther from its mounting point than a short adapter.
- Standard 1/4-inch connections support a range of compatible rig accessories.
- The rubber cushion provides a contact surface intended to protect a monitor and help tighten the connection.
Consider before buying
- The 213 g maximum weight recommendation limits it to lightweight accessories and setups.
- It is an arm rather than a clamp kit, so the rig must already provide a compatible mounting point.
- Its longer reach may be unnecessary where a compact, close-fitting mount is preferred.
Who Should Buy SmallRig Magic Arm?
Good fit
Buy the SmallRig Magic Arm if your camera rig has a 1/4-inch mounting point and you need to move a lightweight monitor, microphone, or light into a more useful position.
The dual ball heads give you room to adjust orientation, while the 9.8-inch length provides separation between the mounting point and accessory.
Before choosing it, weigh the accessory and consider how far it will extend from the rig.
The listed maximum recommendation is 213 g, and a longer arm gives the attached device more reach; keep the load comfortably within that limit and confirm both ends match your intended attachments.
Who should skip it
Skip this arm if your accessory and mounting setup exceed the 213 g recommendation or you need a support system that includes a clamp for attaching directly to a rod, tube, or desk.
Confirm the mounting points and required reach first if you are assembling a new rig.
How the SmallRig Magic Arm fits a camera rig
A long reach with two adjustable ends
The 9.8-inch length gives this arm room to offset an accessory from its mounting point, while the 360-degree ball heads at both ends allow orientation changes on either side.
That combination can help when a monitor or light needs to sit at a particular viewing or lighting angle. The arm adjusts placement; it does not itself establish where the rig attaches.
Thread compatibility matters
Both ends use 1/4-inch threads, so the arm is most convenient when the accessory and rig already have compatible connections.
Check the actual attachment points on both pieces of equipment before purchasing, especially if the planned connection requires another thread size or mounting interface.
Keep the load light
The supplied maximum weight recommendation is 213 g. Treat that as a key selection limit, and consider the accessory’s weight together with how far it will sit from the mounting point.
This model is best matched to light accessories rather than a heavier monitor setup.
A small contact-protection detail
An O-ring rubber cushion around the screw is intended to reduce scratching on a monitor and help the connection lock more tightly.
It is a useful design detail at the contact point, but buyers should still check that the accessory is seated properly and that the threaded connection suits their equipment.
Alternatives to SmallRig Magic Arm
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 2066B if your rig already has a 1/4-inch mounting point and you only need the arm.
Consider the 2732 if you also need a clamp to attach the setup to a compatible surface or support, and confirm its clamp opening fits your mounting location.
- The 2732 pairs a 9.8-inch articulating arm with a super clamp, includes 1/4-inch and 3/8-inch threaded clamp connections, and has rubber cushions on both the clamp and arm.
- The 2066B is a 9.8-inch arm with two 1/4-inch threaded ends and a 213 g maximum weight recommendation; it does not include a clamp.
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Clamp Mount
Choose the 2066B when you need a 9.8-inch arm and already have a suitable 1/4-inch attachment point.
The 1138 is a better fit when direct clamping to a support is central to the setup or you need a higher listed capacity; verify that its clamp and attachment arrangement suit your location.
- The 1138 combines a super clamp, double ball head, and 1/4-inch-20 screw, and is described for attaching compatible gear to rods, tubes, tables, frames, or tripods.
- Its listed weight capacity is up to 1.5 kg.
- The 2066B offers a longer articulated arm with 1/4-inch threaded ends for positioning a lightweight accessory from an existing rig connection.
Is SmallRig Magic Arm Worth It?
The SmallRig 2066B is worth considering for lightweight camera-rig accessories when flexible angle adjustment and a 9.8-inch reach are more useful than an integrated clamp.
Its dual ball heads, 1/4-inch ends, and cushioned screw make a focused, adaptable mounting arm.
Keep the 213 g maximum weight recommendation and the need for compatible mounting points in mind.
If those constraints fit your setup, it is a practical option for positioning a small monitor, microphone, or light; choose a different support style when the accessory is heavier or your rig needs its own clamp.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsSmallRig 2066B Adjustable Articulating Magic Arm
A flexible positioning arm for camera rig users mounting a compatible monitor, light, or microphone with a 1/4-inch connection.
- 9.8-inch articulating arm for positioning compatible camera accessories.
- Double ball-head design with 360-degree adjustment at both ends.
- 1/4-inch threaded screw at each end for connecting compatible gear.
- O-ring rubber cushion at the screw is designed to help prevent monitor scratches and improve grip.